RidgeGear Fall Protection Range	Fall Arrest Blocks / Inertia Reels RidgeGear
	All prices are exclusive of Carriage & Value Added Tax

RidgeGear RGA1 Mini Block	RGA1 Mini Webbing Fall Arrest Block  The RGA1 is a retractable mini web block ideal for personal issue to operatives working at height. The unit is designed to be connected, and worn directly on a fall arrest harness. The RGA1 has an almost instant “lock off” in the event of a fall, and recoils into the drum when slack is introduced into the lanyard. The reduced trip hazard and compact design make this unit ideal for tight work and tasks where a shorter arc of mobility is required. The RGA1 can also be fitted to most horizontal lifelines, but always check with the manufacturer prior to fitting. The RGA 1 has a working length of 2.5 metres. Accredited to: EN 360 Web Spec: 47mm Polyester Connector: RGK1 Weight: 1.4 kg Features: Built-in shock pack Size mm: L 100 x W 110 x D 75 Max Arrest Force: < 6 kN Approx Arrest Dist: 0.1 Metres	£51.10 each Quantity :
RidgeGear RGA2 Fall Arrest Block	RGA2 10Mtr Wire Fall Arrest Block  The RGA2 is a multi purpose fall arrest block, which allows uninhibited movement during normal working activity. The carrying handle is part of the cast alloy housing and can be connected to the anchorage point using soft slings or a karabiner. The RGA2 is used throughout the industry to provide semi permanent protection in work areas, and is also used on lorry sheeting gantries in conjunction with a beam trolley (RGBT 1). For self-connecting to the block, it is recommended that the operative uses an extension strop (RGL4) in order to ease the task. The RGA2 has a working length of: 10 metres Accredited to: EN 360 Cable Spec: 5mm Galvanized Steel Wire Rope Connector: Double action. High tensile steel alloy Weight: 6.5 kg Features: Fall indicating connector Size mm: L 325 x W 200 x D 80 Max Arrest Force: < 6 kN Approx Arrest Dist: 0.5 Metres	£281.50 each Quantity :
RidgeGear RGA2 Fall Arrest Block	RGA26 6Mtr Wire Fall Arrest Block  A lighter weight and smaller fall arrest block than the RGA2, the RGA26 is also a multi purpose fall arrest block, which allows uninhibited movement during normal working activity. The carrying handle is part of the cast alloy housing and can be connected to the anchorage point using soft slings or a karabiner. The RGA26 is used throughout the industry to provide semi permanent protection in work areas, and is also used on lorry sheeting gantries in conjunction with a beam trolley (RGBT 1). For self-connecting to the block, it is recommended that the operative uses an extension strop (RGL4) in order to ease the task. The RGA26 has a working length of: 6 metres Accredited to: EN 360 Cable Spec: 5mm Galvanized Steel Wire Rope Connector: Double action. High tensile steel alloy Weight: 5.2 kg Features: Fall indicating connector Size mm: L 285 x W 180 x D 80 Max Arrest Force: < 6 kN Approx Arrest Dist: 0.5 Metres	£263.90 each Quantity :
RidgeGear RGA3 Fall Arrest Block	RGA3 15Mtr Wire Fall Arrest Block  The RGA3 is a robust fall arrest block, and the “big brother” of the RGA2. With its longer working length and heavier construction, the RGA3 has been used successfully by the offshore industry for years. The carrying handle of the RGA 3 is part of the cast alloy housing and can be connected to the anchorage point using soft slings or a karabiner. The RGA3 is suitable for use in most industries to provide protection in work areas with overhead anchorage points. The RGA3 has a working length of 15 metres. Accredited to: EN 360 Cable Spec: 5mm Galvanized Steel Wire Rope Connector: Double action. High tensile steel alloy Weight: 10.5 kg Features: Fall indicating connector Size mm: L 340 x W 228 x D 80 Max Arrest Force: < 6 kN Approx Arrest Dist: 0.5 Metres	£339.00 each Quantity :
RidgeGear RGA4 Fall Arrest Block	RGA4 15Mtr Wire Fall Arrest & Rescue Block  The RGA4 is a three way retrieval block fitted with an up/down winch mechanism and the standard fall arrest capability. This unit can be used as a standard fall arrest block, but in the event of a fall, the operative can be winched up or down to safety almost immediately. As most rescue systems lower the casualty, the RGA4 can raise the operative to safe area, if the area below is unsuitable. The RGA4 can also be fitted to the RGR1 tripod for use in the confined access industry, as it can lower a worker into an area where no ladders are fitted. The RGA4 has a working length of 15 metres. Accredited to: EN 360 & EN 1496 A&B Cable Spec: 5mm Galvanized Steel Wire Rope Connector: Double action. High tensile steel alloy Weight: 11.35 kg Features: Fall indicating connector. Retrieval system. Size mm: L 340 x W 258 x D 80 Max Arrest Force: < 6 kN Approx Arrest Dist: 0.5 Metres	£587.95 each Quantity :
RidgeGear RGA5 Fall Arrest Block	RGA5 5Mtr Webbing Fall Arrest Block   The RGA5 is a compact, robust yet lightweight fall arrest block. This unit does not have an integral handle, but is fitted with an alloy swivel eye for connection to an anchorage via a karabiner. Due to its low weight, this device is ideal for use with certain horizontal lifelines. As a general-purpose fall arrest block, the RGA5 has proved its worth in the industry. Fitted with webbing instead of wire, this block is suited for work in and around fragile components i.e.; aircraft industry and glass lined vessels. The RGA5 has a working length of 5 metres. Accredited to: EN 360, ANSI Z359. 1-1992, CSA Z259.2.2-98 Web Spec: 28mm Multi panel polyester. MBS 2350kgs Connector: Double action. High tensile steel alloy Weight: 2 kgs Features: Rip stitch indicator Size mm: L 170 x W 120 x D 75 Max Arrest Force: < 6 kN Approx Arrest Dist: 1.2 Metres	£260.00 each Quantity :
	RGA7 33Mtr Wire Fall Arrest Block   The RGA 7 is an alternative to the RGA3 and has the addition benefit of a longer cable length of 33mtr. The RGA7 fall arrest block is suitable for use in most industries to provide protection in work areas with overhead anchorage points. Not suitable for use in horizontal mode. The RGA7 has a working length of 33 metres. Accredited to: EN 360, ANSI 1014, CSA Z259.2.2.96 Cable Spec: 5mm Galvanized Steel Wire Rope. Length 33mtr Connector: Double action. High tensile steel alloy Weight: 14.5 kgs Features: Fall indicating connector Size mm: L 360 x W 320 x D 150 Max Arrest Force: < 6 kN Approx Arrest Dist: 0.5 Metres Max SWL: 150kg	£769.00 each Quantity :
	RGA8 33Mtr Wire Fall Arrest Block with Auto Descent   Similar to the RGA7, the RGA8 fall arrest block also has the benefit of a longer cable length of 33mtr. The RGA8 has an extra feature of an automatic descender that will activate in the event of a fall and automatically lower the user to the ground. The RGA8 fall arrest block is suitable for use in most industries to provide protection in work areas with overhead anchorage points. Not suitable for use in horizontal mode. The RGA8 has a working length of 33 metres. Accredited to: EN 341 (d), EN 360, ANSI 1014, CSA Z259.2.2.96 Cable Spec: 5mm Galvanized Steel Wire Rope. Length 33mtr Connector: Double action. High tensile steel alloy Weight: 14.5 kgs Features: Fall indicating connector. Integrated automatic descender Size mm: L 360 x W 320 x D 180 Max Arrest Force: < 6 kN Approx Arrest Dist: 0.5 Metres	£1053.00 each Quantity :
	RGA9 33Mtr Wire Fall Arrest Block with Auto Descent   RGA9 fall arrest block manufactured from powder coated die cast aluminium with self-retracting wire lanyard and a bolt on emergency rescue winch. The integrated swivel hook avoids torsion on the wire lanyard. Load indicator shows if a fall has occurred. The RGA9 is a three Way retrieval block fitted with an up / down winch mechanism and the rnstandard fall arrest capability. The unit can Also be Supplied with Stainless Steel Wire Rope The RGA 9 has a Built in Load Indicator Not suitable for use in horizontal mode. The RGA9 has a working length of 33 metres. Accredited to: EN 360, CSA Z259.2.2.98 Material: Die Cast Alloy Cable Spec: 5mm Galvanized Steel Wire Rope. Length 33mtr Connector: Double action. High tensile steel alloy Weight: 17 kgs Features: 33 Metre Fall Arrest with Rescue Winch Built in	£1135.00 each Quantity :